Recently I went to the market with a friend to buy some foodstuffs as soon as we packed, I noticed some market women, flexing with us – brother, come and buy fish o o o, brother come and buy palm oil, brother come and buy this and that. Trust me now, like a true Lagosian; I also compliment their gestures. We went straight into the market, and promised them to back and but from them, which we did – we don’t break promises. So, when we were ready to leave, one of them said; we thought you will buy more than 25 liters of oil, with all this your American look. Lol So, if you want to look fresh like me; sit up! As I’m going to share with you an old secret to killing face pimples and rashes.
Recommended: How To Produce Original Nail Polish Remover
Ingredients Needed With Measurement
- Wax ——————————————————— 1/8
- Petroleum Jelly ——————————————- 1/4
- Paraffin Oil ————————————————- 1/4
- Menthol —————————————————– a sachet
- Metica ——————————————————- (1/8) or 30 mil
- Peppermint ————————————————— (1/8) or 30 mil
- Phenol ——————————————————– (1/16) 15 mil
- Sulphur ——————————————————- As desired
- Titanium —————————————————- As desired
Recommended: How To Produce Awesome Face Powder
Function of each ingredient
- Wax helps to solidify the product
- Petroleum Jelly give the product a smooth touch
- Paraffin Oil also gives a smooth touch
- Menthol, Metica, Peppermint gives Minty effect
- Phenol cures rashes
- Sulphur is a natural cure for rashes and skin diseases
- Titanium gives the product the whitish color
Steps In Producing Quality Face Pimple or Rashes Killer
Note: Don’t allow too much of heat. The purpose of the heat is just to melt the ingredients; so they can mix properly.
Step 1: Get a burner e.t gas cooker, stove or traditional burner
Step 2: Get a pot the burner with an average heat
Step 3: Light the burner, and place the empty pot on it
Recommended: Common Liquid Soap Chemicals And Their Uses
Step 4: Put the Wax in the pot and allow it to melt
Step 5: Put the Petroleum Jelly in the same pot
Step 6: Now, pour the Paraffin Oil in the same pot
Step 7: Then followed by the Menthol, Metica, and Peppermint
Step 8: Pour the Phenol in the same pot
Step 9: Grind the Sulphur into a powdered form, and pour it into the same pot (try with a small quantity of a teaspoon)
Step 10: Finally, add the Titanium to get the desired whitish color
Do you have your chemical shop or distributor in abia state
Aba please let me know [email protected] that my mail
Unfortunately, we only have our address in Lagos.
Where to get earmbase chemicals in Ghana
Unfortunately, we don’ have any distributor in Ghana yet. All orders are made from Nigeria for now. Thanks for visiting earnbase.