Comprehensive Step by Step Guide to Make Liquid Soap

COMMON INGREDIENTSFinally, you are going to learn one of the several methods to make a liquid soap. There are so many methods to making a liquid soap; just as there are many approaches to solve a Mathematical problem.

The steps here are simple and down to earth.

STAGE ONE

Get a balf with measurement not a must i.e a medium bucket – Lets call it Bucket 1

  1. Put the right quantity of Surfonic Acid in the Bucket 1
  2. Put the appropriate quantity of Texapon in Bucket 1
  3. Put the right quantity of Rice/Rice Powder in Bucket 1

The next thing is to stir the mixture without WATER; after stirring for like 5 minutes then you can add some water – not too much.

STAGE TWO

Get another balf with measurement  not a must anyway i.e a medium bucket – Lets call it Bucket 2

  1. Put the right Soda ash in Bucket 2
  2. Put the right quantity of STPP in Bucket 2

These two ingredients are powders; so, you just need to add some water and stir- not too much.

Now, leave both mixtures for like 30 minutes

STAGE THREE

Get another balf with measurement  not a must anyway i.e a BIG bucket – Lets call it Bucket 3

  1. make sure the bucket is bugger than 25 liters
  2. Put some water in this BIG bucket… like 10 liters
  3. Put two cap of Formalin in the BIG bucket for preservation
  4. Then put the right quantity of NITROZON and stir as you do; like you are making Amala. I mean, you will use one hand to stir and the other to pore NITROZON.
  5. Pore the content in Bucket 1 into Bucket 3 and ADD a small amount of Custic Soda
  6. Stir for like 10 minutes
  7. Pore the content in Bucket 2 into Bucket 3 stir !!!

STAGE FOUR

After you must have stirred it properly; then you should try and

  1. Add some Coloring
  2. Add some Perfume 

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Sorry, contents on this blog are copyright protected!