The steps here are simple and down to earth.
Get a balf with measurement not a must i.e a medium bucket – Lets call it Bucket 1
- Put the right quantity of Surfonic Acid in the Bucket 1
- Put the appropriate quantity of Texapon in Bucket 1
- Put the right quantity of Rice/Rice Powder in Bucket 1
The next thing is to stir the mixture without WATER; after stirring for like 5 minutes then you can add some water – not too much.
Get another balf with measurement not a must anyway i.e a medium bucket – Lets call it Bucket 2
- Put the right Soda ash in Bucket 2
- Put the right quantity of STPP in Bucket 2
These two ingredients are powders; so, you just need to add some water and stir- not too much.
Now, leave both mixtures for like 30 minutes
Get another balf with measurement not a must anyway i.e a BIG bucket – Lets call it Bucket 3
- make sure the bucket is bugger than 25 liters
- Put some water in this BIG bucket… like 10 liters
- Put two cap of Formalin in the BIG bucket for preservation
- Then put the right quantity of NITROZON and stir as you do; like you are making Amala. I mean, you will use one hand to stir and the other to pore NITROZON.
- Pore the content in Bucket 1 into Bucket 3 and ADD a small amount of Custic Soda
- Stir for like 10 minutes
- Pore the content in Bucket 2 into Bucket 3 stir !!!
After you must have stirred it properly; then you should try and
- Add some Coloring
- Add some Perfume